You are here: Home / Archives for military look

Military look for Murder in the Dark club

April 11, 2011 by

I attended the opening of new Gothic Industrial club “Murder in the Dark” on Saturday night at the Gaelic Club, and so thought it appropriate to go back to my monochromatic ways for the night. My first night out since I returned from Japan, I thoroughly enjoyed catching up with old friends and meeting new peeps as well!

Murder in the Dark is the latest venture for Rivetting Promotions, and coming up on 22nd April is the Grendel/Nachtmahr/Shiv-R gig at the Sandringham Hotel Newtown (with other dates in other states) – so mark it in your diaries if you’re into dark electro-industrial music.

But back to the outfit:

Military leopard cap: Kitty Van Horne
Jacket and skirt: Purpur
Frilled Collar: Black Peace Now for men
Diamond tights: Leg Avenue
White wedge boots: Esperanza
see my Esperanza shoe post here for more)
Dreadlock weft: Ales Wigs 
(see my Ales Wigs post here for more info. The weft is pinned around my bun with copious amounts of bobby pins)

 

Here’s a crowd shot at the club from the smoking room…often the busiest place in a club!

The little Kitty Van Horne cap I bought at the Sydney Alternative Rock n Roll Markets, the Purpur outfit at House of Fetish – and I should point out that I do have the matching Purpur cap in slick PVC, but the leopard makes the ensemble a little more whimsical and less matchy matchy.

Outfit posted just so y’all know I haven’t abandoned the dark aesthetic, despite my recent love affair with colour blocking!

Filed Under: Alternative Fashion, Fashion, gothic fashion, Outfit posts Tagged With: , , , , ,

DIY military cap

December 4, 2009 by

I thought I’d do a nifty DIY for those who, like me, love the military look. I really like those little military caps, but don’t have great sewing skills to make one from scratch. So, I decided to transform an ordinary straw cowboy hat I had lying around, into THIS:

The hat before I started – it was a cheap nasty one from Target.  We’re just going to use the top of the hat and discard the brim.

 
What you need:
a hat, ruler and pencil, scissors, grosgrain ribbon, paint and glue.
Optional extras: hat elastic, brooch or other embellishment to decorate the hat.
 
Step 1. Measure your hat across the top…
…and down the side
Decide how deep you want the cap (that is, how high it’s going to sit on your head).
Step 2. Go round the hat and mark in pencil where you’re going to cut it. You want it slightly longer in the front so you get that point (otherwise it will just look like a Fez – fine if you’re in Morocco, but not the look we’re going for here!) It should look something like this:
The hat from the side. See it’s a slightly diagonal line. You may want to mark a couple of different lines, if you’re not sure what depth you want the hat to be.
Step 3. Now it’s time to cut it with some sharp scissors. If in doubt, make it higher than you think you may need it, put it on your head to see what it looks like, and cut more away if need be.
The hat when cut.
If you have a dummy head, or a willing friend to model it, put the cap on to see if it’s the height you want it.

I didn’t like the ‘pinches’ either side of the crown, as they are just too cowboy for my taste, so I decided to get rid of them by steaming the cap. This isn’t too scary, and doesn’t require special equipment, trust me!
Step 4. Bring a pot of water to the boil, preferably with a lid with a small steam hole in it. Otherwise, just put the lid on the pot at a bit of an angle, so some steam can escape from the side.
Step 5. Roll a small towel into a sausage shape and place inside the cap.  This is to keep the shape of the cap. The steam is going to get rid of the pinches.
 
Step 6. Bring the cap to the steam hole in the saucepan lid, keeping your hand away from the hole. Ok, maybe this is a little scary. Make sure you don’t burn yourself.
Steam until the indents are sufficiently lessened, and put the cap somewhere sunny to dry (as it will be a little moist from the steam). Leave the towel in while the cap dries.
Step 7. I sprayed my hat with black paint – you may want another colour. Either take it out somewhere airy like a balcony to spray it with paint, or you could brush the paint on. I found enamel paint in a spray can adhered better to the straw. Ordinary school paints may just be absorbed. Again, allow to dry.
Now to finish off that nasty raw edge!
Step 8. Measure round the edge of the cap, and cut a piece of grosgrain ribbon slightly longer.  We’re going to glue it around the edge, with half the width of the ribbon either side. I folded the ribbon over first and creased it with my fingers, to help me keep it even as I glued.
Step 9. Glue the ribbon round the edge of the cap – don’t use too much or it will get messy, and spoil the finish. You could sew it instead of gluing – but that’s a lot of work!
Step 10. The cap may just sit fine by itself, but if you want to make sure it stays on your head, you could attach some hat elastic. Measure yourself ear to ear, cut the elastic, thread the elastic through the basketweave of the straw either side of the cap, and knot it on the inside.
Step 11. If you want to further embellish the hat as I did, grab a brooch or similar and pin through the hat.  I bought the skull cameo and metal backing from ebay and glued them together myself. The beauty of brooches is that you can change them to go with different outfits.
And Voila!
The military/geek look in action.
Patent corset: Deadlygirlz aka DGFH7
PVC tie: Gothic Doll tie from Refuse To Be Usual, ebay
I will be doing a DIY on a similar gothic lolita tie a little down the track. The dread/cyberlox wig in the first pic was also made by me. I may post a DIY if anyone is interested 🙂
Filed Under: Blog entry Tagged With: , , ,